37
(6) Changing programs
A change can be made to programs 0 to 9.
Commands to instrument
Command Data type Symbol
Character string P 0 1Change to program 1
ASCII 50H 30H 31H
Character string P 0 4Change to program 4
ASCII 50H 30H 34H
Data transmitted to personal computer
When a program change is made through the serial communication, one of the
data shown in the table below is returned back.
Instrument condition Data type Externally returned data
Character string @ 0 P R O G 1 CR LF
Change to program 1
finished
ASCII 40H 30H 50H 52H 4FH 47H 31H 20H 20H 20H 20H 20H 20H 0DH 0AH
Character string @ 0 P R O G 2 CR LFChange to program 4
finished
ASCII 40H 30H 50H 52H 4FH 47H 32H 20H 20H 20H 20H 20H 20H 0DH 0AH
To Next Page
Loading...