Toss ROPEX RESISTRON RES-403 User Manual

Industrie-Elektronik GmbH Tel: +49/(0)7142/7776-0 E-Mail: info@ropex.de
Gansäcker 21 Fax: +49/(0)7142/7776-19 Internet: www.ropex.de
D-74321-Bietigheim-Bissingen (Germany) Data subject to change
26.6.06
RESISTRON
RES-403
GB
Important features
• Microprocessor technology
• Automatic zero calibration (AUTOCAL)
• Automatic optimization (AUTOTUNE)
• Automatic configuration of the secondary voltage and current ranges
(AUTORANGE, as of October 2005)
• Automatic phase angle compensation (AUTOCOMP, as of October 2005)
• Automatic frequency adjustment
• Large current and voltage range
• Set point selection with potentiometer
• 0…10VDC analog output for ACTUAL temperature
• Activated with contact or 24VDC signal
• Alarm function with fault diagnosis
• Heatsealing band alloy and temperature range selectable
Operating
Instructions

Toss ROPEX RESISTRON RES-403 Specifications

General

Brand	Toss
Model	ROPEX RESISTRON RES-403
Category	Controller
Language	English

Summary

Safety and Warning Notes

General Safety and Component Precautions

Covers essential safety for controller use, bands, transformers, and filters.

Warranty and Standards Compliance

Principle of Operation

Description of the Controller

Technical Data

Installation

Installation Procedure and Steps

Power Supply, Wiring, and Filters

Electrical connection, wiring, and line filter installation for safe operation.

Current Transformer and Standard Wiring

Startup, Operation, and Configuration

Procedures for initial startup, operation, and controller configuration.

DIP Switch and Rotary Coding Configuration

Alarm Relay and Heatsealing Band Handling

Controller Functions

Indicators, Controls, and Temperature Setting

Temperature Indication and Automatic Calibration

Understanding actual value output and the AUTOCAL calibration process.

"START" Signal and Advanced Functions

System Monitoring and Error Messages

Features for system monitoring, alarm output, and comprehensive error message handling.

Fault Areas and Causes

Factory Settings

Maintenance