21/32
Oil change
Changing the oil can only be done by a qualified service technician and according to
the manufacturer’s instructions.
Draining the oil:
1. Lower the forks to the bottom position.
2. Remove the screw and turn the pallet truck on its side.
3. The oil now drains out of the hole (collect the waste oil
in an oil receptacle).
Filling up the oil:
1. Pour the oil in the hole.
2. Insert the screw into the hole of the reservoir.
3. Bleed the air from the pump unit.
Bleed the air from the pump unit:
1. Set the handle in the LOWER position
2. Move the handle up and down several times
To Next Page
Loading...
