To Next Page
E
ericksondanielAug 6, 2025
What to do if the forks descend on Total Source TRP0007 Trucks without using the release valve?
- CchristinemorrowAug 6, 2025
If the forks on your Total Source Trucks descend without you operating the release valve, it could be due to several reasons. It might be that impurities in the oil are preventing the release valve from closing correctly, in which case you should change the oil. Another cause could be cracked or worn parts in the hydraulic system, so inspect these and replace if necessary. Air in the hydraulic oil, worn or damaged sealing parts, an incorrectly adjusted nut or screw, or an incorrectly adjusted control lever could also be the cause. In the last two cases, adjust the nut or screw, or follow the procedure for adjusting the control lever.
General