Unoccupied Operation - During programmed, unoccupied periods,
pressing the OVERRIDE button will temporarily force the thermostat into
Occupied 1 comfort settings for 30 minutes. The remaining Override time
will alternate with the clock (refer to the second display below). The
Override timer can be set up to a maximum of four (4:00) hours, in
increments of 30 minutes. If the timer has been set for the maximum time,
the next press of the OVERRIDE button will reset the timer,
returning the thermostat to the correct time period program for the day.
Occupied Operation - During programmed, occupied periods, a press of
the OVERRIDE button will force the thermostat into an unoccupied period
for the remainder of the day. During this forced unoccupied period the
OVERRIDE button will operate as described above.
The OVERRIDE button may be used to interrupt the normal time
schedule programming of the thermostat. Override may only be used
when the thermostat is running the time schedule, in Program On
mode.
65
85
55
unoccupied
ProgramOn
Pm
COOL
HEAT
Stop
Su
I2:00
73
74
72
occupied
ProgramOn
Pm
COOL
HEAT
Override
Su
1
0:30
I2:00
Overriding the Daily Schedule
Page 13
Press
OVERRIDE
To Next Page
Loading...
Need help?
General
