To Next PageTo Next Page
Need help?Do you have a question about the TOTALINE P/N P474-2150 and is the answer not in the manual?
General| Stages | 1 Heat/1 Cool |
|---|---|
| Programmability | 7-Day Programmable |
| Display | Digital |
| Compatibility | Standard HVAC systems |
| Power Source | Battery or Hardwired |
| Battery | 2 AA batteries |
Describes the Liquid Crystal Display and the Heat/Cool indicator lights.
Explains the function of the Mode, Up/Down, and Override buttons.
Details the thermostat's display of mode, time, day, room temp, and set temp.
Explains indicators for Override, Occupied/Unoccupied, Setup, Fan, Locked, and Start/Stop.
Instructions on how to enter the thermostat's setup screens using Mode and Override buttons.
Guidance on adjusting the time of day and day of the week using buttons.
Steps to exit setup mode and return the thermostat to its normal operating state.
Explains how to select HEAT, COOL, AUTO, PROGRAM ON, and OFF modes.
Details how to set desired temperatures for heating and cooling.
How to temporarily override programmed settings for up to 4 hours.
Determines the number of occupied periods (1, 2, or 3) to be programmed.
Adjusting cooling and heating setpoints for the first occupied period.
Adjusting cooling setpoints for unoccupied periods.
Adjusting heating setpoints for unoccupied periods.
Selecting which days of the week apply to Occupied period 1.
Setting the start and stop times for Occupied period 1.
Configuring whether Occupied period 1 runs on a specific day.
Setting start/stop times and enabling/disabling for Saturday Occupied 1.
Setting start/stop times and enabling/disabling for Sunday Occupied 1.
Instructions on how to exit the programming mode.
Clarifies rules for skipped periods, setpoint differences, and priority.
Procedure to access the advanced setup menu using Mode and Override buttons.
Configuration of the thermostat's current time and day of the week.
Setting the display to be always on or to blank after inactivity.
Configuring fan operation modes: Fan On or Fan Auto.
Configuration for Heat Pump mode and reversing valve polarity (O or B).
Enabling/disabling electric heat and setting the deadband for temperature swings.
Setting the minimum temperature difference between heating and cooling setpoints.
Setting the compressor cycles per hour limit and lockout options.
Options for the display backlight: always on or off after a delay.
Choosing between Fahrenheit and Centigrade for temperature display.
Procedure to exit setup screens using Mode and Override buttons.
A table summarizing all advanced setup options, descriptions, ranges, and defaults.
How the thermostat maintains time during power outages without batteries.
Explanation of how second stage heating or cooling is activated based on temperature spread.
How the minimum difference between heat and cool setpoints is enforced.
Details on when the fan runs in Energy Saving Smart Fan mode.
In-depth explanation of how the Override function works during occupied/unoccupied periods.
How to activate and the behavior of Emergency Heat mode for heat pumps.
Enabling electric heat and its effect on fan operation.
How to lock and unlock the thermostat keypad to prevent unauthorized use.
Configuration and behavior of the display blanking feature.
Explains how heat and cool setpoints interact, especially in Auto mode.
Procedure to reset all thermostat settings to their factory default values.
Information about an optional accessory for physical security.
Details the warranty period, coverage, and exclusions for the thermostat.
Lists limitations, what is not covered, and manufacturer responsibilities.
