TOTALINE P/N P474-2150 - Programming Occupied Periods; Setting Occupied Period Count; Setting Occupied 1 Setpoints; Setting Unoccupied Setpoints

Programming Occupied & Unoccupied Periods
Page 8
Press
Press
Press
Press
Press the Mode button. While holding the Mode,
press the Up button for 2 seconds to enter
time period programming.
Continued
Select the maximum # of
occupied periods to be
used on any one day.
Typically 1.
(1,2 or 3)
Adjust the cooling
setpoint for occupied 1.
Adjust the cooling
setpoint for unoccupied
periods.
Adjust the heating
setpoint for occupied 1.
(35 - 99 )
(35 - 99 )
(35 - 99 )
MODE
MODE
MODE
MODE
MODE
Occupied 1
74
Occupied
COOL
1
74
72
Occupied
COOL
HEAT
1
85
unoccupied
COOL