X
xweberSep 10, 2025
Why are the LEDs flickering on the main display of my Toto toilet?
- KKendra BrownSep 10, 2025
LEDs may flicker on the main display because the tank is filling with water, which can take up to 60 seconds.
To Next PageTo Next PageWhy are the LEDs flickering on the main display of my Toto toilet?
LEDs may flicker on the main display because the tank is filling with water, which can take up to 60 seconds.
What to do if my Toto toilet does not flush when the button is pressed?
If your Toto toilet doesn't flush when the button is pressed, it may be because the tank is still filling with water. Once the 'Power' LEDs on the main display are lit and the tank is full, try flushing the toilet again.
How to fix a flashing low battery warning LED on my Toto toilet remote control?
If the Low Battery Warning LED is flashing on your remote control, replace the batteries.
What to do if a water leak occurs with my Toto toilet?
If a water leak occurs, immediately close the shutoff valve.
Why does my Toto toilet emit a strange odor?
A strange odor might be emitted if you are using an air freshener or deodorizer that you purchased separately. Try removing the air freshener or deodorizer to see if that resolves the issue.
What to do if the low battery warning LED is flashing on my Toto toilet remote control?
If the low battery warning LED is flashing on your Toto toilet remote control, replace the batteries.
Why does the display on my Toto toilet remote control go out?
The display goes out when no button on the remote control is pressed for 1 minute or more. This is normal operation.
Why is the cleansing water cold on my Toto toilet?
If the temperature of the water supply or the bathroom is low, the water temperature may be low when first sprayed. This is normal in cold conditions.
Why doesn't the lid of my Toto toilet open automatically?
If the toilet lid does not open automatically, check if 'AUTO OPEN/CLOSE (LID)' is set to 'OFF'. If it is, set it to 'ON'.
Why does the deodorizer not seem to be working on my Toto toilet?
If the deodorizer is not working, check whether 'DEODORIZER' is set to 'OFF'. If it is, set it to 'ON'.
General| Flush System | Tornado Flush |
|---|---|
| Flush Type | Dual Flush |
| Material | Ceramic |
| Seat Type | Heated Seat |
| Remote Control | Yes |
| Type | One-piece |
| Features | Heated seat, Air deodorizer |
| Color | Cotton White |
| Water Usage | 0.8/1.0 gallons per flush |
| Bidet Functions | Front and rear wash |
| Power Supply | AC120V |
Outlines technical details and performance metrics.
Critical instructions on electricity, water, and product handling.
Precautions against water contact, thunderstorms, and improper electrical use.
Bathroom ventilation, sunlight, and burn risks from heated surfaces.
Specifies the need for proper grounding and outlet types.
Instructions for handling power plugs and cords safely.
Advice on proper handling, avoiding impact, and safe cleaning agents.
Procedures to prevent water leaks and warnings about UV light.
Procedures for handling water leaks and preventing freezing.
Guidance on preventing clogs and safe cleaning practices.
Dangers related to water immersion and electrical shock.
Rules for safe use, especially with children and air openings.
Detailed steps and requirements for product grounding.
Tips to avoid sensor issues, damage, and ensure proper operation.
Steps for lightning risks and safe usage practices.
Details automatic deodorizing and wand cleaning processes.
Explains bowl cleaning, photocatalyst, and indicator lights.
How the toilet flushes automatically after use.
Details automatic opening and closing of the toilet lid and seat.
How to set the warm water temperature for cleansing.
How to set the heated toilet seat temperature.
How to set the drying air temperature.
Instructions for cleaning the bowl using the hand lever during a power failure.
Method for flushing the toilet using a bucket during water interruptions.
How to set the dynamic mode for freeze prevention.
Procedures for draining water to prevent freezing.
Interpreting LED behavior for power, energy saver, and clean indicators.
Checks for remote control operation issues.
Diagnosing issues with wand extension and water spray.
Addressing low pressure, cold water, or mid-use stops.
Diagnosing issues with the warm air dryer.
Diagnosing issues with flushing and auto-cleaning.
Solutions for waste not flushing and bowl residue.
Troubleshooting automatic lid and seat opening/closing.
Diagnosing issues with the lid opening or closing unexpectedly.
Troubleshooting simultaneous lid/seat movement and opening timing.
Diagnosing problems with the toilet seat not getting warm.
Troubleshooting energy saver modes and deodorizer issues.
