To Next PageTo Next PageWhat to do if my Toto toilet completely fails to operate?
If your Toto toilet completely fails to operate, first check for a power outage or a tripped circuit breaker. Wait until power is restored, and then turn the circuit breaker back ON. If the power light on the main unit is OFF, push the power button on the main controls to turn it on.
Why is the water pressure low on my Toto toilet?
If the water pressure is low on your Toto toilet, it could be due to a low water pressure setting. Try pushing the water pressure adjustment button on the remote controller to increase it. Another possible cause is a dirty water supply filter, which needs to be cleaned.
What to do if water will not spray from my Toto toilet?
If water will not spray from your Toto toilet, check if water has stopped flowing from the main supply. If so, push the stop button and wait until the main water supply is restored. Also, ensure that the water shutoff valve is open. Finally, ensure that the toilet seat sensor is working properly.
Why is my Toto toilet seat not getting warm?
If your Toto toilet seat isn't getting warm, make sure the toilet seat temperature setting isn't turned OFF or set too low. Adjust the seat temperature by pushing the + or - buttons on the remote controller. Also, if the timer is on "Energy Saving" mode, it takes 15 minutes for the toilet seat to get warm after sitting on it. If the Auto Temperature Preset is turned ON, it will take 5 minutes for the toilet seat to get warm after sitting on it.
How to fix a Toto toilet lid that will not automatically open and close?
If the lid on your Toto toilet will not automatically open and close, the Auto OPEN/CLOSE function may be OFF. Push the "Auto" function of the seat and lid OPEN/CLOSE on the remote controller to turn it ON.
What to do if the wash water is too cold on my Toto toilet?
If the wash water is too cold on your Toto toilet, check if the water temperature setting button is OFF or set too low. Adjust the water temperature by pushing the + or - buttons on the remote controller.
Why is the warm air dryer on my Toto toilet not getting warm?
If the warm air dryer on your Toto toilet is not getting warm, the dryer temperature may be set too low. Adjust the dryer temperature by pushing the + or - buttons on the remote controller.
What to do if the warm air dryer stops working while using my Toto toilet?
If the warm air dryer stops working while in use on your Toto toilet, it might be because the warm air dryer automatically stops after 10 minutes if the "dry" button is pushed. Push the "dry" button again to restart the warm air dryer.
How to fix Toto toilet energy saving functions that fail to operate?
If the Energy Saving functions on your Toto toilet fail to operate, it may be due to a recent power failure or power cord disconnection. In this case, Energy Saving will not work correctly on that day and will begin working on the next day. Also, user settings may be changed when batteries in remote controller are replaced, so please reset preferred settings.
What to do if odors are sometimes not eliminated thoroughly by my Toto toilet?
If odors are sometimes not eliminated thoroughly by your Toto toilet, the deodorizer filter may be dirty. Clean the deodorizer filter.
How to set water, seat, and dryer temperatures.
Setting a timer to turn off the seat heater for energy savings.
Automatic energy saving based on usage patterns.
Procedure to drain water and prevent pipe freezing.
Solutions for the unit completely failing to operate.
Troubleshooting water spray and pressure issues.
Diagnosing and fixing issues with the heated toilet seat.
Troubleshooting problems with the warm air dryer function.
General