To Next PageTo Next PageWhat to do if my Toto toilet does not flush?
If your Toto toilet isn't flushing even when you press the button, there are a few potential causes. First, check if water is available from the water supply; if not, use a bucket full of water to flush. Next, make sure the water supply valve is fully open. Finally, verify that the "AUTO FLUSH" setting is set to "ON".
Why is the cleansing water pressure weak in my Toto toilet?
If the cleansing water pressure in your Toto toilet is weak, it could be due to a couple of reasons. Check if the water filter drain valve is clogged with foreign matter and clean the filter if necessary. Also, ensure that the water supply valve is fully open.
How to fix a water leak from my Toto toilet plumbing?
If you notice water leaking from the plumbing connections of your Toto toilet, check if any nuts in the connection are loose. Firmly tighten them with a tool such as a monkey wrench. If the leak persists, close the water supply valve and seek repair.
What to do if waste material does not flush completely in my Toto toilet?
If waste material isn't flushing down completely in your Toto toilet, it might be because the water supply to the toilet is disrupted by other running water fixtures. Try ceasing using other fixtures and then flush the toilet.
What to do if the Toto toilet bowl unit does not flush automatically?
If your Toto toilet bowl unit does not flush automatically or the timing is delayed, especially after standing and not moving away from the front of the toilet, step away from the toilet and wait for about three seconds.
Why is my Toto toilet seat not getting warm?
If your Toto toilet seat isn't getting warm, check if the toilet seat temperature is set to “OFF” or a low level and adjust the temperature setting accordingly.
Why is the cleansing water cold in my Toto toilet?
If the cleansing water in your Toto toilet is cold, it's likely that the water temperature is set to “OFF” or a low level. Adjust the water temperature to a higher setting.
Why is the deodorizer not working on my Toto toilet?
If the deodorizer on your Toto toilet isn't working, check if the "DEODORIZER" setting is set to "OFF". If it is, set it to "ON".
How to fix a Toto toilet wand that does not extend?
To address a Toto toilet wand that does not extend, disconnect the power plug and wait about 10 seconds before inserting it again. If the same symptom reappears consult with the contact listed on the back cover of this manual.
General| Brand | Toto |
|---|---|
| Bowl Shape | Elongated |
| Control Type | Remote Control |
| Model | NEOREST |
| Flush System | Tornado Flush |
| Water Consumption | 0.8 GPF (Gallons Per Flush) / 1.0 GPF (Dual Flush option on some models) |
| Features | Air Deodorizer, Warm Air Dryer |
| Bidet Function | Yes |
| Color Options | Cotton White, Sedona Beige |
Covers essential safety warnings and guidelines for product usage.
Explains symbols used for important safety instructions.
Highlights precautions related to power plugs, cords, outlets, and grounding.
Covers warnings for water, heat, irritation, and proper usage environments.
Covers warnings against flames, force, crushing hoses, and cleaning.
Details dangers of water contact, supervision, and proper use.
Focuses on water exposure, cord damage, and electrical grounding for safety.
Provides critical safety alerts for electrocution and injury.
Provides guidance on using the product correctly to avoid issues.
Guides on initial setup and first-time use of the Washlet.
Guides on initial setup, battery insertion, and power connection.
Detailed steps for inserting batteries, turning on power, and connecting water.
Guides on setting temperatures for seat, water, and drying air.
Guides on setting temperatures for seat, water, and drying air.
Provides instructions for configuring energy-saving features.
Instructions for enabling and disabling the auto energy-saver feature.
Steps to set and change the timer for energy saving.
Guides for diagnosing and resolving common product issues.
Detailed technical specifications of the product.
Information on warranty terms, exclusions, and service.
Outlines the warranty period, coverage, and exclusions.
Lists conditions and damages not covered by the warranty.
Details the process for requesting warranty repairs and support.
