What to do if the low battery warning LED is flashing on my Toto toilet remote control?
- DDiana EvansAug 4, 2025
If the low battery warning LED is flashing on your Toto toilet remote control, replace the batteries.
What to do if the low battery warning LED is flashing on my Toto toilet remote control?
If the low battery warning LED is flashing on your Toto toilet remote control, replace the batteries.
What to do if Toto toilet stops because of low water pressure?
If you are experiencing significantly low water supply pressure, the function of your Toto toilet may stop for safety. To resolve this, disconnect the power plug, wait for about 10 seconds, and then reinsert it.
Why is the ENERGY SAVER LED (orange) lit on my Toto toilet?
If the ENERGY SAVER LED (orange) is lit on your Toto toilet, it means the toilet seat temperature has been lowered to save energy.
What to do if Toto toilet stops working after sitting for 2 hours?
If you have been sitting on your Toto toilet continuously for 2 hours or longer, stand up from the seat and then use it again.
Bowl Height | 16.5 inches |
---|---|
Flushing System | Tornado Flush |
Seat Type | Heated Seat |
Bidet Function | Yes |
Remote Control | Yes |
Material | Ceramic |
Shape | Elongated |
Dryer | Yes |
Deodorizer | Yes |
Auto Flush | Yes |
Night Light | Yes |
Power Source | Electric |
Warranty | 1 Year Limited |
Water Consumption | 0.8 GPF |
Features | Heated Seat, Air Dryer, Deodorizer |
Details for product warranty registration, inquiries, and customer service contact information.
Explains the self-cleaning functions using EWATER+ and Clean Light.
Explains warning and caution symbols used in the manual.
Essential safety warnings and guidelines for product installation and use.
Covers safe electrical connections, grounding requirements, and preventing shocks.
Details on proper handling, avoiding damage, and user safety precautions.
Explicit prohibitions to prevent electrical hazards like shock and fire.
How body sensors and seat switches detect user presence and activate functions.
Details the parts located on the top unit of the toilet.
Instructions for installing batteries and mounting the remote control.
Steps to turn on the unit and establish water supply.
Details how to use washing, drying, and stopping features via the remote.
Using the remote for flushing and automatic lid/seat opening and closing.
Overview of how to access and navigate the settings menu on the remote control.
Explains automatic flushing and automatic lid/seat opening and closing.
Steps to set the desired temperatures for warm water and the toilet seat.
Explains energy saving modes and how to set them.
How to clean the bowl unit and use a plunger for clogs.
How to set auto flush ON/OFF and delay times.
How to set auto open/close, delay times, and seat/lid options.
How to set auto wand cleaning and deodorizer functions.
How to enable or disable soft light, bowl light, and clean indicator.
Configuring beep sounds and locking personal settings.
Customizing water pressure and wand position settings.
How to manually flush the toilet using the hand lever during a power failure.
Procedure for using battery backup during extended power failures.
Actions to take if there is no water flow due to service interruption.
Steps to drain water to prevent pipe freezing during cold periods.
Interpreting LED status and troubleshooting remote control functionality.
Addresses issues with wand extension, water pressure, and water temperature.
Checks for low dryer temperature and common flushing malfunctions.
Addresses incomplete flushing and automatic toilet lid/seat issues.
Diagnosing why the toilet lid might open or close on its own.
Checks for warm seat function and energy saver mode problems.
Addresses problems with the deodorizer function and unusual odors.
Troubleshooting light, mist spray, and clean indicator issues.
Steps for fixing plumbing leaks and remote display issues.
Investigating unit instability and unusual operational sounds.