ValueLine Series Electric Fireplace
www.touchstonehomeproducts.com 800.215.1990
20
Wall Mounted Installation – cont.
4. Mark location of bracket on wall and then mount the bracket to the wall using the supplied screws and dry wall
anchors. The hooks in the bracket MUST be pointed away from the wall, upward, and level.
5. Mount bracket to at least 2 studs. If 2 studs cannot be used, ensure that the supplied dry wall anchors are used to
affix the bracket to the wall and the bracket is adequately secured before moving to the next step. Use 1 screw hole
in each of the 9 sections shown below (A – I).
To Next Page
Loading...
