Touchstone 80018 - Crystal Ember Installation

ValueLine Series Electric Fireplace
www.touchstonehomeproducts.com 800.215.1990
22
Wall Mounted Installation – cont.
b. Crystal Ember Installation
i. Prior to installing the crystal embers,
remove the faux fire log from the
fireplace.
ii. Remove the brackets holding the log in
place.
iii. Once the brackets are removed,
remove the faux fire log from the
fireplace.
iv. Carefully, place crystal embers on
plastic strip as illustrated in the picture to
the right. Apply an even layer from side
to side.
2a. Remove Left Bracket 2b. Remove right bracket
3. Remove faux fire log