12
USING YOUR AIR FRYER
SETTING THE TEMPERATURE:
1. Press the Temp ▲ or ▼ arrows
to manually adjust the cooking
temperature, by increments of
5. Press the ▲ key to increase the
temperature or the ▼ key to decrease
it.
2. Alternatively, press and hold the
Temperature ▲ or ▼ keys to cycle
through the available time options in
more quickly.
NOTE: Temperature ranges will differ
according to the function or mode
selected.
SETTING THE TIMER:
1. Press the Time ▲ or ▼ arrows to
manually adjust the cooking time
from 1 to 60 minutes, by increments of
1. Press the ▲ key to increase the time
or the ▼ key to decrease it.
2. Alternatively, press and hold the
Time ▲ or ▼ keys to cycle through the
available time options in more quickly.
STARTING AND PAUSING THE
COOKING PROCESS:
1. Once the appropriate function,
time and temperature have been
selected, touch the Start/Pause
key on the unit’s control panel
to start the cooking process.
Alternatively, touch the Start/Pause
key without programming the time
or temperature to start a cooking
session on the default settings for
each pre-set.
2. Touch the Start/Pause button or
cooking basket selection button while
the unit is in operation to pause the
cooking process, and press the Start/
Pause button again while the unit is
paused to resume it.
3. Alternatively, long-press the Power
button to interrupt and cancel the
cooking cycle. The unit will go into
Standby mode.
COOKING WITH BOTH
COOKING BASKETS:
This unit offers a choice of two functions
when cooking with both cooking baskets
simultaneously. The ‘Smart’ function
allows you to cook separate ingredients
on each cooking basket so that they are
ready at the same time, while the ‘Match’
function lets you set both cooking baskets
of the air fryer on the same settings,
allowing for larger batch cooking.
COOKING SEPARATE
INGREDIENTS THE ‘SMART’
FUNCTION:
1. To use either cooking basket of
the air fryer on separate time and
temperature settings, press the
‘Smart’ button on the unit’s control
panel. The corresponding indicator
will flash to show this function has
been selected.
2. Once the ‘Smart’ function is selected,
press the ‘1’ button on the unit’s
control panel to select and set one of
the unit’s cooking baskets. The LED
screen will display the default time
and temperature for the selected
setting.
NOTE: After a pre-set has been selected,
the default cooking time and temperature
settings can be adjusted manually to suit
individual preference. Refer to the ‘Setting
the Temperature’ and ‘Setting the Timer’
sections of this instruction manual for
guidance on how to select and set the
required time and temperature.
3. Once the required settings have been
selected on the first cooking basket,
press the ‘2’ button to move on to
programming the second cooking
basket. The unit’s LED displays will
alternately display the time and
temperature for each of the selected
pre-sets.
4. Repeat the process detailed above
to select a pre-set menu and adjust
cooking settings for the second
cooking basket. When the required
settings have been selected, press
the Start/Pause button to start the
cooking process. The unit will begin
to cook the food inside each cooking
basket on the selected setting for
To Next Page
Loading...
