40
Batteries
Wheels
Chassis & Assemblies
Turntable
Drive Chain
Functional Check
Lighting
charge at least 1x per month
check the battery plug for damage, function and
tightness
Check drive wheels for wear and damage
Tighten the wheel nuts of the drive wheels (220Nm)
Check castors for wear and damage
Air pressure of pneumatic tires (9 bar)
Visual inspection
Check bolts and screws
Check readability and completeness of the labels
Lubricate Drive Chain
Visual inspection and tension check
Functional test of all commands on the remote control
Driving check
Lubricate anged rollers
Folding mechanism and sitting of the ramp without load
Check bolts and screws
Check the function of the lighting
10h
25h
50h
25h
50h
10h
50h
50h
50h
25h
50h
25h
50h
25h
25h
50h
50h
monthly
anually
anually
half-yearly
anually
monthly
anually
anually
anually
half-yearly
anually
anually
anually
half-yearly
half-yearly
anually
anually
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Assembly Action Interval
To Next Page
Loading...