4Runner_Navi_U (L/O 0208)
92
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
The tire change calibration function
should be used when the tires are re-
placed. This will adjust for any pos-
sible change in tire circumference from
the old tires to the new ones. If this
procedure is not performed when tires
are replaced, the current vehicle posi-
tion mark may become incorrect.
To execute the fast distance tire calibra-
tion procedure, touch the
“Tire
change”
switch on the “Calibration”
screen.
L00132
The above message appears and the fast
distance calibration is automatically star-
ted. A few seconds later, the map screen
returns.
To Next Page
Loading...
