4Runner_Navi_U (L/O 0208)
130
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
This section describes some of the basic
features of the Toyota audio system.
Some information may not pertain to your
system.
Your audio system works when the igni-
tion switch is in the “ACC” or “ON” posi-
tion.
NOTICE
To prevent the battery from being
discharged, do not leave the car au-
dio on longer than necessary when
the engine is not running.
L00166
(a) Turning the system on and off
PWR·VOL: Push this knob to turn the
audio system on and off. Turn this knob
to adjust the volume. The system turns
on in the last mode used.
AUDIO: Push this button to display
switches for audio system (audio control
mode).
You can select the function that enables
automatic return to the previous screen
from the audio screen. See page 124 for
details.
Push “AM”, “FM”, “DISC” or “TAPE”
button to turn on the desired mode.
The selected mode turns on immedi-
ately.
Push these buttons if you want to switch
from one mode to another.
If the tape or disc is not set, the cassette
player or compact disc player does not
turn on.
You can turn off the cassette player or
compact disc player by ejecting the cas-
sette tape or compact disc. If the audio
system was previously off, then the entire
audio system will be turned off when you
eject the cassette tape. If another func-
tion was previously playing, it will come
on again.
Using your audio system—
—Some basics
To Next Page
Loading...
