4Runner_Navi_U (L/O 0208)
174
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
1. Volume control button
Push “+” to increase the volume. The
volume continues to increase while the
button is being pressed.
Push “–” to decrease the volume. The
volume continues to decrease while the
button is being pressed.
2. “” button (Seek, search, track)
Radio
This switch has the following features—
To seek a station:
Quickly push and release the “” or “”
side of the switch. Do this again to find
the next station. If you push the switch
on either side during the seek mode,
seeking will be cancelled.
To select a preset station:
Push and hold the “” or “” side of the
switch. Do this again to select the next
preset station.
Cassette tape player
This switch has the following features—
To skip to a different track in either direc-
tion:
Quickly push and release the “” or “”
side of the switch. “FF 1” or “REW 1” will
appear on the display.
Next, push either side of the track switch
until the track you want to listen to is
set. If you push the switch ten times, the
skip function will turn off. (You can skip
up to nine tracks at a time.)
When counting the number of the tracks
you want to rewind, remember to count
the current track as well. For example, if
you want to rewind to a song that is two
before the song you are listening to,
push the “” side of the button three
times.
If you push the track button further than
you wanted to, push the other side of the
button. The track number will be in-
creased or reduced.
The track number you select is not valid
if it is higher than the number of the
tracks remaining on the current side of
the cassette.
When the tape reaches to the begin-
ning, the player will automatically start
playing that side.
After the tape reaches to the end, the
player will automatically reverse and
start playing the other side.
To Next Page
Loading...
