120
RAV4_OM_OM42A41U_(U)
3-2. Opening, closing and locking the doors
The power back door system can be disabled by operating the multi-
information display.
Press or of the meter control switches and select on
the multi-information display.
Press or of the meter control switches and select ,
and then press .
Select “System Settings” and then press .
Press . (“All Off” will be displayed on the multi-information dis-
play.)
Each time is pressed, the system will be enabled/disabled.
The open position of the power back door can be adjusted.
■ Using the multi-information display
Press or of the meter control switches and select
on the multi-information display.
Press or of the meter control switches and select ,
and then press .
Select “Opening Adjustment” and then press .
Select the desired position and then press . (P. 699)
■ Using the power back door switch
Open the back door, and adjust it to the desired position.
Press and hold the power back door switch on the back door until
the buzzer sounds 4 times.
Canceling the power back door system (vehicles with power
back door)
Adjusting the open position of the back door (vehicles with
power back door)
1
2
3
4
1
2
3
4
1
2
To Next Page
Loading...
