Toyota 2016 RAV4 - Changing Settings of the Pre-Collision System; Enabling;Disabling the Pre-Collision System

242
RAV4_OM_OM42A41U_(U)
4-5. Using the driving support systems
■ Enabling/disabling the pre-collision system
Press or of the meter control switches and select
on the multi-information display.
Press or of the meter control switches and select ,
and then press .
Select and then press .
Each time is pressed, the system will be enabled/disabled.
The system is automatically enabled each time the engine switch is
turned to IGNITION ON mode.
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
Changing settings of the pre-collision system
1
2
3