EasyManua.ls Logo

Toyota 2016 RAV4 - When the System Malfunctions

Toyota 2016 RAV4
740 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
284
RAV4_OM_OM42A41U_(U)
4-5. Using the driving support systems
The following situations may occur during use:
Depending on the shape of the obstacle and other factors, the detection
distance may shorten, or detection may be impossible.
Obstacles may not be detected if they are too close to the sensor.
There will be a short delay between obstacle detection and indicator.
Even at slow speeds, there is a possibility that the obstacle will come
within the sensor’s detection areas before the indicator comes on and the
warning beep sounds.
Thin posts or objects lower than the sensor may not be detected when
approached, even if they have been detected once.
It might be difficult to hear beeps due to the volume of audio system or air
flow noise of the air conditioning system.
When the system malfunctions
4 sensor type
If the vehicle indicator remains on while the rear corner and rear center indi-
cators flash and the malfunction beep sounds for approximately 7 seconds,
have the vehicle inspected by your Toyota dealer.
If the vehicle indicator and the rear corner and rear center indicators flash
and the malfunction beep sounds for approximately 7 seconds, clean the
sensors with soft cloth.
8 sensor type
A message is displayed on the multi-information display: P. 628
Customization
Setting of buzzer volume can be changed.
(Customizable features
P. 701)
Certification (Canada only)
This ISM device complies with Canadian ICES-001.

Table of Contents

Other manuals for Toyota 2016 RAV4

Related product manuals