Do you have a question about the Toyota 3S-GTE and is the answer not in the manual?
Engine Type | Inline-4 |
---|---|
Displacement | 1998 cc |
Turbocharged | Yes |
Fuel System | EFI |
Compression Ratio | 8.5:1 |
Turbocharger (Gen 3) | CT20b |
Max Torque (Gen 4) | 324 N⋅m (239 lb⋅ft) at 4, 400 rpm |
Bore x Stroke | 86.0 mm × 86.0 mm |
Valvetrain | DOHC |
Max Power (Gen 1) | 136 kW (185 PS; 182 hp) at 6, 000 rpm |
Max Torque (Gen 3) | 353 N⋅m (260 lb⋅ft) at 4, 000 rpm |
Max Power (Gen 4) | 260 PS (191 kW) at 6, 400 rpm |
Oil Capacity | 4.5 liters |
Guide on navigating the manual, section titles, and main headings.
General guidelines for vehicle repair, including safety and operational procedures.
Guide to determining bolt strength based on markings and classes.
Detailed information on engine mechanical components, their descriptions, and functions.
Procedures for engine tune-up, including coolant and oil inspections.
Steps for checking cylinder compression pressure, including warm-up and component removal.
Step-by-step instructions for removing the turbocharger assembly.
Step-by-step instructions for installing the turbocharger assembly.
Steps for draining and refilling the intercooler coolant.
Inspection of turbocharger actuator, impeller wheel rotation, and play.
Overview of the EFI system, including fuel, air induction, and electronic control systems.
Explanation of how fuel is supplied and injected into the engine.
Description of how air is filtered and distributed to the engine.
Details on the Toyota Computer Controlled System (TCCS) and ECU functions.
Diagram showing the operation and flow of the engine cooling system.
Exploded view of water pump components for removal and installation.
Specifications for thermostat, radiator cap, electric cooling fan, and torque settings.
Diagram illustrating the engine lubrication flow from the oil pump to various components.
Exploded view of oil pump components for removal and installation.
Specifications for oil pressure, oil pump, and torque settings.
Service data for the starter, including no-load characteristics, and torque specifications.
Illustrated breakdown of alternator components for disassembly and assembly.
Specifications for battery, drive belt, alternator, and IC regulator, plus torque specs.