Toyota 8FDU30 User Manual

ENGINE OVERHEATS
Classification
I
Ignition
Compression
Main places for inspection and adjustment
1. Governor controller
2. Ignition timing I
1. Cylinder head gasket
2. Cylinder head
3. Cylinder block
1. Coolant
2. V-belt
3. Radiator [Point I]
4. Thermostat
[Point I]
Check for bubble formation inside radiator
When bubbles form in the radiator due to a fault in the cyclinder head, gasket, or cylinder block, the engine oil
becomes cloudy.
4Y-E Repair
Section 1.1.1

Toyota 8FDU30 Specifications

General

Engine Type	Diesel
Tire Type	Pneumatic
Load Capacity	3000 kg
Load Center	500 mm
Mast Type	3-Stage
Lift Height	3000 mm