What to do if the engine does not respond to the accelerator pedal on Toyota Forklifts?
If your Toyota Forklifts engine isn't responding when you press the accelerator pedal, the issue might stem from the injection pump. Try servicing or replacing the injection pump to resolve this.
Why does the idle speed deviate from the specified value in Toyota 8FGU18?
If your Toyota Forklifts idle speed is off, it might be the injection pump. Try adjusting the idle set screw to fix it.
What to do if the idle up speed does not rise on Toyota 8FGU18?
If the idle up speed on your Toyota Forklifts isn't increasing, the problem might be with the injection pump. Addressing this involves servicing the injection pump, which may include applying grease, etc.
How to fix the idle switch open error on Toyota Forklifts?
If you're getting an idle switch open error on your Toyota Forklifts, it might be related to the injection pump. Replacing the return spring might solve the problem.
General| Model | 8FGU18 |
|---|---|
| Category | Forklifts |
| Tire Type | Pneumatic |
| Load Capacity | 1800 kg |
| Engine Type | Gasoline or LPG |
| Engine Model | Toyota 4Y |
| Mast Type | 2-stage |
| Overall Width | 1150 mm |
| Travel Speed (loaded/unloaded) | 18 km/h (unloaded) |
| Operating Weight | 6, 500 lbs (2, 948 kg) |
| Turning Radius | 81.1 inches (2, 060 mm) |
To Next Page
