Toyota AVALON 2005 - Replacing light bulbs

’05 AVALON_U (L/O 0501)
369
2005 AVALON from Jan. ’05 Prod. (OM41408U)
1. Turn the vertical movement adjusting
bolt 1 in either direction using a Phil-
lips- head screwdriver. At this time,
keep the turning direction and number
of turns in mind.
2. Turn the vertical movement adjusting
bolt 2 the same number of turns and
in the same direction as step 1 using
a Phillips- head screwdriver.
The following illustrations show how to
gain access to the bulbs. When replacing
a bulb, make sure the ignition switch and
light switch are off. Use bulbs with the
wattage ratings given in the table.
CAUTION
 To prevent burning yourself, do not
replace the light bulbs while they
are hot.
 Halogen bulbs have pressurized gas
inside and require special handling.
They can burst or shatter if
scratched or dropped. Hold a bulb
only by its plastic or metal case.
Do not touch the glass part of a
bulb with bare hands.
—Adjusting the vertical aiming Replacing light bulbs—
Information Provided by: