π End active call while a call is held
1 Press and hold the Mode button.
The system responds: Call menu. {Say a command}.
2 Say Hang Up.
The system responds: Call ended. The held call is automatically resumed.
ó Note: Pressing the Seek down button ends the active call (while a call is held).
π Make a call while in an active call
When in an active call, you can make an outgoing call using the Dial Number and
Call <name> commands. The active call is placed on hold.
π Join both active call and held call into a three-way conference
1 Press and hold the Mode button.
The system responds: Call menu. {Say a command}.
2 Say Conference.
The system responds: Starting conference.
π Split a three-way conference
1 Press and hold the Mode button.
The system responds: Call menu. {Say a command}.
2 Say Private Conference.
The system responds: Leaving conference. The last call to be added to conference is
placed on hold.
π End all calls
1 Press and hold the Mode button.
The system responds: Call menu. {Say a command}.
2 Say Hangup All Calls.
The system responds: All calls ended.
ó Note: Pressing and holding the Seek down button ends all calls.
Seamless mobility
If you have an active private call and you turn the vehicle ignition on, the hands-free
system automatically connects to your paired handset device and transfers the call to the
hands-free system.
If you have an active hands-free call and you switch the vehicle ignition o, the hands-
free system automatically transfers the call to your handset device.
If your handset device prompts to switch the call to the handset, select yes.
To Next Page
Loading...
