Toyota COROLLA CROSS 2022 - Continuously Variable Transmission; Auto Lock;Unlock

12
* The vehicle must be on and the brake pedal depressed to shift from Park.
Shift the shift lever to “M” position from “D” position.
Downshifting increases power going uphill, or provides engine braking downhill.
For best fuel economy during normal driving conditions, always drive with the shift
lever in the “D” position.
Refer to the Owner’s Manual for more details.
Drive
Park*
Reverse
Neutral
“M” position
P
R
N
D
M
CHANGING GEAR STEPS IN THE M POSITION
+ (“M” mode)
- (“M” mode)
+ : Upshift (push and release)
- : Downshift (pull and release)
Continuously variable transmission
FEATURES & OPERATIONS
DEFAULT SETTING
CUSTOMIZED SETTING
Auto lock/unlock
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-Doors lock when the vehicle speed goes above approximately 12 mph (20 km/h)
or higher.
Driver’s door linked door unlocking function
-Doors automatically unlock when the driver’s door is opened.
Refer to the Owner’s Manual or contact your Toyota dealer for more details.
Driver side
All window auto up/down
Push the switch completely down or pull it completely up and release to fully open
or close. To stop the window partway, operate the switch in the opposite direction.
Window lock switch
Deactivates all passenger windows. Driver’s window remains operable.
Recommended open position
to minimize wind noise.
SLIDING OPERATION
Lightly press either side of the moonroof switch while opening/tilting is in progress,
the moonroof stops partway.
176137_Corolla_Cross_QRG_GUTS.indd 12 8/6/21 5:14 PM