17
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
Parking
brake light
Automatic
To turn automatic mode ON, while vehicle is stopped, pull and hold the switch until
“EPB Shift Interlock Function Activated” displays on Multi-Information Display (MID).
While depressing brake pedal, shifting into P position will automatically set the
brake, and turn the parking brake indicator and parking brake light on. To release
brake, depress brake pedal and shift out of P. The indicator and the light turn off.
To turn automatic mode OFF, press and hold the parking brake switch until “EPB
Shift Interlock Function Deactivated” displays on the MID.
Manual
While vehicle is stopped and brake pedal is depressed, pull the switch to set the
parking brake and turn the parking brake indicator and parking brake light on. To
release, press the brake pedal and push the switch. The indicator and the light turn
off.
Refer to the Owner’s Manual for limitations and more details.
BRAKE HOLD
Standby indicator Operating indicator
Brake hold
The brake hold system keeps the brake applied when the shift lever is in D, M or N
with the system on and the brake pedal has been depressed to stop the vehicle.
The system releases the brake when the accelerator pedal is depressed with the
shift lever in D or M to allow smooth start off.
Refer to the Owner’s Manual for limitations and more details.
FRONT
REAR (IF EQUIPPED)
Cup holders
FRONT (DOOR MOUNTED)
REAR (DOOR MOUNTED)
Bottle holders
176137_Corolla_Cross_QRG_GUTS.indd 17 8/6/21 5:14 PM