EasyManua.ls Logo

Toyota COROLLA CROSS 2022 - Page 43

Toyota COROLLA CROSS 2022
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
(1) Press switches and select from the Multi-Information Display (MID).
(2) Press “ ” switches and select “ LTA” and then press and hold “ .” The
setting screen is displayed.
(3) Press
switches and select “Sway Sensitivity” and then press
to select
the desired setting.
(4) Press “
” to go back to the menu.
Refer to the Toyota Owner’s Manual for additional information on LTA operation,
settings adjustments, limitations, and precautions before attempting to use it.
(1) Press
switches and select
from the Multi-Information Display (MID).
(2) Press “ ” switches and select “ LTA” and then press and hold “ .” The
setting screen is displayed.
(3) Press
switches and select “Sway Warning” and then press
to select the
desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
DISABLING LANE CENTERING FUNCTION
LANE CENTERING
The lane centering function is linked with Full-Speed Range Dynamic Radar Cruise
Control (DRCC) and provides the required assistance by operating the steering
wheel to keep the vehicle in its current lane.
When Full-Speed Range Dynamic Radar Cruise Control (DRCC) is not operating,
the lane centering function does not operate.
(1) Press “
” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “ .” The
setting screen is displayed.
(3) Press
switches and select “Lane Center” and then press to select the
desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LTA operation,
settings adjustments, limitations, and precautions before attempting to use it.
176137_Corolla_Cross_QRG_GUTS.indd 41 8/6/21 5:15 PM

Table of Contents

Related product manuals