34
TOYOTA SUPRA SAFETY
Blind Spot Monitor
(if equipped)
Blind Spot Monitor detects vehicles in the blind spot or vehicles approaching from
behind in the adjacent lane. A warning is issued in various gradations in these
situations.
Radar sensors monitor the area behind and next to the vehicle when traveling faster
than 15 mph.
The system indicates whether there are vehicles in the blind spot (1) or
approaching from behind in the adjacent lane (2) as shown in the image above.
A warning light in the exterior mirror will illuminate to indicate a vehicle in either of
these areas.
If signaling a lane change to an area where the system detects a vehicle, the
system will issue additional warning by flashing the light in the exterior mirror and
vibrating the steering wheel.
Refer to the “Owner’s Manual” for limitations and more details on this system.
SWITCHING THE SYSTEM ON/OFF
Default Setting
This system will be turned on automatically at the start of each drive cycle if the
Toyota Supra Safety system was turned off during the last drive cycle.
Switching on/off manually
Press
button. The menu for the Toyota Supra Safety system is displayed. Select
“Custom Settings”, then “Blind Spot Monitor” and select “Off” to turn this feature off.
SETTING THE WARNING TIME
Setting the warning time via Toyota Supra Command
1) “My Vehicle”
2) “Vehicle settings”
3) “Toyota Supra Safety”
4) “Blind Spot Monitor”
5) Select desired setting.
• “Early”
• “Medium”
• “Late”
• “Off”
To Next Page
Loading...
