Toyota HILUX ‘A’ DECK - Final Harness Routing and Connections; Securing Excess Power Harness; Connecting 6-Way Male Connector

Page 26 of 34Accessory Part No. PZQ70-89870ISSUE 4: 09/10/18
Hard Tonneau Cover, A-Deck
Accessory Part No. PZQ70-89870
TC0403c
63. Secure excess Power Harness (1) away from the rear RH wheel arch area using the supplied Cable Ties (2).
See Dia #63.
Diagram #63
64. Using a supplied Cleaning Pad, clean the outside of the front tub panel in the area shown (1).
Secure the Power Harness to the front section of the tub using supplied Cable Tie Mount and Cable Tie (2). See Dia #64.
Diagram #64
65. Connect the 6-way male connector (1) to the front LH tonneau rail bracket (2). See Dia #65.
Diagram #65
Important
Ensure the Power Harness is kept clear of all sharp
edges or moving parts.
1
2
2
1
Front of vehicle
Important
Allow the areas cleaned with the supplied Cleaning
Pad to dry before continuing.
2
1
2
1