Hard Tonneau Cover, A-Deck
Accessory Part No. PZQ70-89870
TC0403c
Page 5 of 34Accessory Part No. PZQ70-89870ISSUE 4: 09/10/18
Diagram #3
COMPLETE STEP 3 TO 5 ONLY IF VEHICLE IS FITTED WITH A UTELINER
1. NOTE: Two people are required to complete installation. Prior to removing the sports bar assembly from the
vehicle, tape the front nut plate (for the forward facing bolts) securely to the tub, between the tub and the cabin, as access
is restricted after the sports bar assembly is fitted to the tub. Remove sports bar from the vehicle. Retain the hardware for
reinstallation. See Dia #1.
REMOVE HARDWARE IN 12 LOCATIONS
3. Remove the uteliner. See Dia #3.
UTELINER
Diagram #1
2. Thoroughly clean installation areas. See Dia #2.
Diagram #2
T40
To Next Page
Loading...
