164
4-2. Driving procedures
Turns the brake hold system on
The brake hold standby indicator
(green) comes on. While the system
is holding the brake, the brake hold
operated indicator (yellow) comes
on.
■
Brake hold system operating con-
ditions
The brake hold system cannot be turned
on in the following conditions:
●
The driver’s door is not closed.
●
The driver is not wearing the seat belt.
●
The parking brake is engaged.
If any of the conditions above are
detected when the brake hold system is
■
When the parking brake cannot
be released due to a malfunction
Driving the vehicle with the parking
brake set will lead to brake compo-
nents overheating, which may affect
braking performance and increase
brake wear.
Have the vehicle inspected by your
Toyota dealer immediately if this
occurs.
Brake Hold
The brake hold system keeps
the brake applied when the
shift lever is in D, M or N with
the system on and the brake
pedal has been depressed to
stop the vehicle. The system
releases the brake when the
accelerator pedal is depressed
with the shift lever in D or M to
allow smooth start off.
Enabling the system
To Next Page
Loading...
