259
4
4-5. Using the driving support systems
Driving
mal. Note that normal driving is still
possible even when Multi-terrain
Select brake control is not operating.
*
: After stopping the vehicle, do not stop
the engine until the display message
has turned off.
■
When Mud & Sand or Rock & Dirt
mode is canceled
In the following situations, Mud & Sand
mode or Rock & Dirt mode are automat-
ically canceled even if they are selected.
●
When the driving mode is changed
(P.255)
●
When the engine switch is turned off
■
Driving in Mud & Sand or Rock &
Dirt mode
The following types of situations may
occur, but they are not malfunctions.
●
Vibrations may be felt throughout the
vehicle or steering wheel
●
Operating noise may be heard from
the engine compartment
■
When an inspection at your Toyota
dealer is necessary
In the following situations, the system
may be malfunctioning. Have the vehicle
inspected by your Toyota dealer immedi-
ately.
●
When the slip indicator light illumi-
nates while Mud & Sand or Rock &
Dirt mode is selected
●
When the indicator for each mode
does not illuminate even though Mud
& Sand or Rock & Dirt mode is
selected
Press the snow mode switch.
When the switch is pressed, the system
switches to snow mode and the snow
mode indicator illuminates on the
multi-information display.
When the switch is pressed again, the
snow mode indicator turns off.
■
When changing to snow mode
The background of the multi-information
display changes.
■
Canceling the snow mode
Snow mode is automatically canceled
when the engine switch is turned OFF or
Mud & Sand or Rock & Dirt mode is
selected for Multi-terrain Select (AWD
models only).
Snow mode switch
Snow mode can be selected to
suit the conditions when driv-
ing on slippery road surfaces,
such as on snow.
System operation
To Next Page
Loading...
