93
3
3-2. Opening, closing and locking the doors
Before driving
3-2.Opening, closing and locking the doors
■
Smart entry & start system
Carry the electronic key to enable
this function.
1 Grip the front door handle to
unlock all the doors.
*
Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for 3
seconds after the doors are locked.
*
: The door unlock settings can be
changed. (P.93, 396)
2 Touch the lock sensor (the
indentation on the upper part of
the front door handle) to lock all
the doors.
Check that the door is securely locked.
■
Wireless remote control
1 Locks all the doors
Check that the door is securely locked.
Press and hold to close the windows
*1
and moon roof
*1, 2
2 Unlocks all the doors
Press and hold to open the windows
*1
and moon roof
*1, 2
*1
: This setting must be customized at
your Toyota dealer.
*2
: If equipped
■
Switching the door unlock function
It is possible to set which doors the entry
function unlocks using the wireless
remote control.
1 Turn the engine switch off.
2 When the indicator light on the key
surface is not on, press and hold
, or for approxi-
mately 5 seconds while pressing and
holding .
The setting changes each time an oper-
ation is performed, as shown below.
(When changing the setting continu-
ously, release the buttons, wait for at
least 5 seconds, and repeat step 2.)
Side doors
The vehicle can be locked and
unlocked using the entry func-
tion, wireless remote control or
door lock switches.
Unlocking and locking the
doors from the outside
To Next Page
Loading...
