74
2-1. Instrument cluster
Average fuel economy
Displayed item (listed below) can be
changed on the fuel economy type
screen of . (P. 76 )
Total (after reset)
Displays the average fuel consumption
since the display was reset.
*1, 3
Tank (after refuel)
Displays the average fuel consumption
since the vehicle was refueled.
*1
When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without
turning the engine switch off, the dis-
play may not be updated.
*1
: Use the displayed fuel consumption
as a reference only.
*2
: The default setting is no display.
*3
: This display can be reset by press-
ing and holding while it is dis-
played.
■
Eco Driving Indicator/Driving
range
Eco Driving Indicator
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or
when the vehicle is stopped, the light
turns off.
Eco Driving Indicator Zone Dis-
play
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on
acceleration
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
Zone of Eco driving
Driving range
Displays driving range with remaining
fuel. Use the displayed values as a ref-
erence only.
This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
To Next Page
Loading...
