TP-Link AC1200 - Step 2. Configure PPTP VPN Connection on Your Remote Device

50
Chapter9 VPN Server
1 ) Click Add.
2 ) Enter the Username and Password to authenticate devices to the PPTP VPN
Server.
3 ) Click
Save.
9. 2. 2. Step 2. Configure PPTP VPN Connection on Your Remote
Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the
Windows built-in PPTP software
as an example.
1. Go to
Start > Control Panel > Network and Internet > Network and Sharing Center.
2. Select Set up a new connection or network.