EasyManua.ls Logo

TP-Link AC1600 - Local Management

TP-Link AC1600
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
91
Chapter 13
Administrate Your Network
3. Enter the old password. Enter the new password and enter again to confirm.
4. Click Save to make the settings effective.
13. 5. Local Management
You can control the local devices authority to manage the modem router via Local
Management feature. By default all local connected devices are allowed to manage the
modem router. You can also allow only one device to manage the modem router.
Follow the steps below to specify the local management.
1. Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2. Go to Advanced > System Tools> Administration page. Locate the Local
Management section.
3. Keep the Port as the default setting. Enter the IP address or MAC address of the
local device to manage the modem router.
4. Click Save to make the settings effective. Now only the device (192.168.1.100)
can manage the modem router. If you want that all local devices can manage the
modem router, just leave the IP/MAC Address field blank.

Table of Contents

Related product manuals