5
Chapter 1
Item Description
Reset Button
Press this button for more than 5 seconds to reset the router to its factory
default settings.
Power On/Off Button Press this button for 1 second to power on or off the router.
Power Port For connecting the router to power socket via the provided power adapter.
Antennas
Used for wireless operation and data transmit. Upright them for the best Wi-
Fi performance.
1. 2. 2. The Front Panel
The router’s LEDs and buttons (view from left to right) are located on the front panel.
You can check the router’s working status by following the LED Explanation table.
LED Explanation
Name Status Indication
(Power)
On The system has started up successfully.
Flashing
The system is starting up or the firmware is being upgraded. Do
not disconnect or power off your router.
Off Power is off.
(2.4GHz Wireless)
On The 2.4GHz wireless band is enabled.
Off The 2.4GHz wireless band is disabled.
(5GHz-1 Wireless)
On The 5GHz-1 wireless band is enabled.
Off The 5GHz-1 wireless band is disabled.
(5GHz-2 Wireless)
On The 5GHz-2 wireless band is enabled.
Off The 5GHz-2 wireless band is disabled.
(Ethernet)
On
At least one powered-on device is connected to the router’s
Ethernet port.
Off
No powered-on device is connected to the router’s Ethernet
port.
(Internet)
Blue On The internet is available.
Orange On
The router’s Internet port is connected, but the internet is not
available.
Off The router’s Internet port is unplugged.
To Next Page
Loading...
Need help?
General
