EasyManua.ls Logo

TP-Link Archer C20 - 4.20 IPv6

TP-Link Archer C20
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Archer C20
AC750 Wireless Dual Band Router
- 105 -
Figure 4-99 Dyn.com/dns DDNS Settings
To set up for DDNS, follow these instructions:
1. Enter the Domain Name you received from dynamic DNS service provider.
2. Enter the Username for your DDNS account.
3. Enter the Password for your DDNS account.
4. Enable DDNS.
5. Click the Login button to login to the DDNS service.
Connection Status -The status of the DDNS service connection is displayed here.
Click Logout to logout of the DDNS service.
Note:
If you want to login again with another account after a successful login, please click the Logout
button, then input your new username and password and click the Login button.
4.20 IPv6
Figure 4-100 IPv6 Support
There are three submenus under the IPv6 Support menu (shown in Figure 4-100): IPv6 Status,
IPv6 WAN and IPv6 LAN. Click either of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.

Table of Contents

Other manuals for TP-Link Archer C20

Related product manuals