8
Chapter 1
Get to Know About Your Router
Item Description
WiFi On/Off For turning on/off the WiFi function.
Reset
The switch for the reset function. There are two ways to
reset the router’s factory defaults.
Method one: With the router powered on, press and
hold the Reset button for at least 5 seconds until all
LEDs light on (wireless LEDs may not light on if the WiFi
on/off button is off). And then release the button and
wait the router to reboot to its factory default settings.
Method two: Restore the default setting from 13.
4. Backup and Restore Configuration Settings of the
router’s Web-based Management.
WPS
The switch for the WPS function. Pressing this button
for less than 5 seconds enables the WPS function. If
your client devices, such as wireless adapters, that
support Wi-Fi Protected Setup, then you can press this
button to quickly establish a connection between the
router and client devices and automatically configure
wireless security for your wireless network.
USB 2.0
For connecting to a 2.0 USB storage device or a 2.0 USB
printer.
USB 3.0
For connecting to a 3.0 USB storage device or a 3.0 USB
printer. It is also compatible with USB 2.0 devices.
To Next Page
Loading...
