TP-Link Archer C88 - CWMP Settings

77
Chapter 13
Manage the Router
13. 8. CWMP Settings
CPE WAN Management Protocol (also called TR-069) allows Auto-Configuration Server
(ACS) to perform auto-configuration, provision, connection, and diagnostics to this
device. You may configure this function under your ISP’s instructions.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > System > CWMP Settings.
3. Configure the parameters according to your ISP’s instructions, and click SAVE .
• CWMP - Toggle on to enable the CWMP function.
• Inform - Enable to send an inform message to the ACS periodically.
• Inform Interval - Enter the time interval when the Inform message will be sent to the
ACS.
• Data Model - Select under your ISP’s instructions the data model according to which
the inform message will be sent to the ACS.
• ACS URL - Enter the web address of the ACS provided by your ISP.
• ACS Username/Password - Enter the username/password to log in to the ACS server.
• Interface used by TR-069 client - Select the interface to be used by the TR-069
client.