TP-Link EAP225-Outdoor - Connecting the EAP Device to the Network; Connect EAP and PC to Router; Ensure Dynamic IP and Internet Access

1
Omada EAP products provide wireless coverage solutions for small-medium business
and households. There are two methods to login to manage your EAPs:

To configure and manage mass EAPs (usually more than three), you can use EAP
controller. For detailed instructions about how to use EAP Controller, visit
http://www.
tp-link.com/en/download/EAP-Controller.html
to download EAP Controller and its
User Guide.

To configure a few EAPs (usually less than three), you can directly use the
management interface of each EAP via a web browser. In such situation, the EAP is in
standalone mode.
This article introduces how to build a wireless network using a standalone EAP.
Follow the steps below:
Step1: Connecting the EAP Device to the network
Refer to the following topology and connect the EAP device to your network.
EAPPC
IP: 192.168.0.100
Router (DHCP Server)
LAN: 192.168.0.1
Internet
Clients
1. Connect your PC and EAP to the LAN ports of your router with Ethernet cables.
2. Set your router to make sure that the PC and EAP can get dynamic IP addresses from
the router and surf the internet.