13
OLT(config)# interface ge
OLT(interface-ge)# vlan mode 9 hybrid
OLT(interface-ge)# vlan hybrid 9 tagged 100
ge9: hybrid add tag vlan:
Fail: 0, Success: 1
3、Configure PON port vlan
Add PON port PON4 to VLAN 100 and set Ethernet port 1 native-vlan as 100.
OLT(config)# interface gpon
OLT(interface-gpon)# vlan mode 4 hybrid
OLT(interface-gpon)# vlan hybrid 4 tagged 100
OLT(interface-gpon)# port vlan native-vlan 4 1 eth 1 vlan 100
4、Binding the traffic profile
To restrict the Ethernet port 1’s upstream and downstream data as the traffic profile set before.
OLT(interface-gpon)# ont port car 4 1 eth 1 inbound 123 outbound 123
5、Save the data.
OLT(config)# save
Configure the ONT on the Web page. (Please reference of the user manual of
4FE+1POTS+WIFI )
Log in to the Web page and then configure the ONT on the Web page：
1、Configure the IP address of the PC network adapter to be in the same network segment with the
IP address of the local maintenance Ethernet port on the ONT (default: 192.168.100.1).
2、Open the Web browser, and enter the IP address of the local maintenance Ethernet port on the
ONT. In the login window, enter the user name (default: CUAdmin) and password (default:
CUAdmin) of the administrator. After the password is authenticated, the Web configuration window
is displayed.
3、Configure parameters of a WAN port.
4、Click Advance SetupWANADD, to add a WAN connection
Select an interface in WAN service interface configuration( For example: veip0.2), then click
next.
To Next Page
Loading...
