17
Gigabit L2 Managed Switch
Connection
Figure 4-3 Connecting the Console (RJ-45) Port
■
Connect the Console (USB) port of the device with your computer by the USB
cable as the following figure shows.
Figure 4-4 Connecting the Console (USB) Port
Console(USB)
You can also manage the device through the console port, for details please refer to
the CLI Reference Guide on the resource CD.
Note:
■
Console (RJ-45) port and Console (USB) port cannot be used concurrently.
Console (USB) port takes priority over the Console (RJ-45) port.
■
Please keep the device power off when plugging the console cable.
■
Do not connect the console port with other ports by RJ45 cable.
4.4 Verify Installation
After completing the installation, please verify the following items:
■
There are 5–10 cm of clearance around the sides of the device for ventilation and
the air flow is adequate.
■
The voltage of the power supply meets the requirement of the input voltage of the
device.
■
The power socket, device and rack are well grounded.
■
The device is correctly connected to other network devices.
To Next Page
Loading...
