Main Page of the SwitchFigure 5-3
You can log on to the Switch and access the CLI by the following two methods:
Log on to the Switch by the console port on the Switch.
■
Log on to the Switch remotely by a Telnet or SSH connection through an Ethernet
■
port.
Logon by a Console Port
■
To log on to the switch by the console port on the Switch, please take the following
steps:
Connect the PCs or Terminals to the console port on the Switch by a provided cable.1.
Click Start2.
→
All Programs
→
Accessories
→
Communications
→
Hyper Terminal to open
the Hyper Terminal as the following figure shown.
Open Hyper TerminalFigure 5-4
Configuration
To Next Page
Loading...
