9
02 / Install Requirements
Read the following instructions rst before installing the new valve:
1. Install the valve rst before powering it up.
2. No need to shut o water before changing the radiator valve. Water will not leak.
3. Avoid installing the valve in the same room where you have installed the boiler thermostat.
4. Install the valve within range of your Kasa smart hub if you wish to control it using the Kasa Smart app.
03 / Install the Valve
1. Unscrew the existing valve.
Vertical InstallationHorizontal Installation
2. Screw the new valve directly (for M30 x 1.5 connector) or after installing the proper adapter (for
non-M30 x 1.5 connectors). The ▲ at the bottom of the valve indicates the position of the display.
To Next Page
Loading...
