TP-Link kasa smart KL400L5 - Configure Device Settings; Customize Device Name and Icon; Set Default States; Advanced Settings and Guides

14
Congure Device Settings
Tap to congure device settings and check device information.
Customize the device name and icon.
Set the default state when your Light Strip is turned on from the app. For
example, if you select Last "ON" State and then turn it on from the app, your
Light Strip will go to the state when it was last turned on.
Set the default state when your Light Strip is turned on from the power
source. For example, if you select Last "ON" State and then turn it on from
power source, your Light Strip will go to the state when it was last turned on.
Check what's new with your Light Strip.
Check device and network information.
Check how to install your Light Strip.