TP-Link NC200 - NC200 Cloud Camera Mounting Guide

NC200
Cloud Camera, 300Mbps Wi-Fi
 Used as RESET button:
With the camera powered on, press and hold the WPS/RESET button (more than 5
seconds) until both the System LED and WPS LED turn off. Then release the button and
wait the camera to reset to its factory default settings.
 Used as WPS button:
If your router supports WPS, then you can press the WPS/RESET button for 1 second to
quickly establish a connection between the camera and router.
2.4 Mount the Camera
2.4.1 The Screw Size
2.4.2 Mount the Camera

Note:
If you use the camera wirelessly, mount the camera within the coverage of your wireless network.
1. Unscrew the camera head.
2. Remove the base cover.
6