TP-Link NC200 - Basic Configuration Settings for NC200 Camera

NC200
Cloud Camera, 300Mbps Wi-Fi
Drag the slider to adjust
the size of the current
image.
The maximum zoom ratio is 4 times.
Mute off. You can hear the
current sound by the
camera.
Click and it will become .
Mute on. The current
sound by the camera is
turned off.
Click and it will become .
Drag the slider to adjust
the sound volume.
Y
ou can adjust the sound volume only with mute
off .
Click to enlarge the
current image
to full
screen display.
Press “ESC” key to return to the original screen
display.
 Brightness: Drag the slider to adjust the brightness level of
camera. Large value will brighten the current displayed screen.
 Contrast: Drag the
slider to adjust the contrast level of the camera.
Large value will contrast the current displayed screen heavily.
 Saturation: Drag the
slider to adjust the saturation level of the
camera. Large value will saturate the current displayed screen to be more colorful.
 Resolution: Select the desired video resolution between two formats: 640*480 and 320*240.
Higher setting offers better quality, but will require more bandwidth to stream.
 Preset: Click the Preset button to restore to factory image settings.
3.3 Basic
Click the Basic menu to display the submenus including Status, Network, Wireless Connection,
Cloud Settings, and LED.
3.3.1 Basic → Status
The Status page displays the current configuration information of the camera. You can find out
11